Parker AC30P 11kW/15kW 400V AC Inverter
Parker AC30P 11kW/15kW 400V AC Inverter, HMI, DBr, STO, C3 EMC
Product Specification:
Parker AC30PÂ AC Frequency Inverter for 11kW (15HP) 400V 3 Ph motor to 23A at high overload or 15kW (20HP) to 32A when Fan/Pump rated, operates in VxF, Sensorless Flux Vector or Full Closed Loop Flux Vector control (when the optional encoder board is fitted). Simple set-up and ready to run in VxF from its default settings.
- Size F- 150mm Wide x 255mm Deep x 383mm High overall. IP20
- Overload – 150% x 60 seconds and 180% for 3.0seconds.
- Speed Control Range – 0/500Hz (default), 0/1000Hz or 0/1500Hz
- Switching Frequency 4 to 16kHz.(Derating may apply)
- Braking (DBr) – Maximum of 20 seconds at maximum current @ a duty 30% into minimum 35 Ohm external resistor – See the Resistor options linked below or use the ‘Which Resistor’ button on this page
- Brake Switch Peak Current 21.5A (20s, 30% Duty) Continuous current 14.4A at 11kW.
- Graphical Keypad (HMI)2 x Analogue Inputs, 3 Digital Inputs,4 Programmable Digital I/O, 2 Analogue outputs, 2 Digital outputs (relay contacts). 2 EtherNet Ports.
- Input Current –21.6A at high overload or 28.5A when Fan/Pump rating set.
- Input Voltage – 380/480V three phase +-10% at 50/60Hz.
- Input fuse – 32A when Fan/Pump rating set
- Filters: EMC Compliance: IEC EN 61800-3 Category C3 (Industrial). Can be disconnected if required.
- Safety Features: STO & Safe Stop (SS1)
- Wall mount in clean environment or cubicle mount.
- Rated at 40C Ambient
- Ventilation space Front – 10mm
- Ventilation space above and below – 75mm.
- Ventilation space at sides – 0mm.
- Heat Loss at max output – Not Specified (estimated efficiency 97%)
- Mounting –M4 screw fixings on 125mm x 370mm centres.
