Parker AC30P 1.5kW/2.2KW Inverter
Parker AC30P 1.5kW/2.2KW 400V AC Inverter, HMI, DBr, STO, C3 EMC
Parker AC30V AC Frequency Inverter for 1.5kW (2HP) 400V 3 Ph motor to 4.5A at high overload or 2.2kW (3HP) to 5.5A when Fan/Pump rated, operates in VxF, Sensorless Flux Vector or Full Closed Loop Flux Vector control (when the optional encoder board is fitted). Simple set-up and ready to run in VxF from its default settings.
- Size D- 100mm Wide x 255mm Deep x 286mm High overall. IP20
- Overload – 150% x 60 seconds and 180% for 3.0seconds.
- Speed Control Range – 0/500Hz (default), 0/1000Hz or 0/1500Hz
- Switching Frequency 4 to 16kHz.(Derating may apply)
- Braking (DBr) – Maximum of 20 seconds at maximum current @ a duty 30% into minimum 260 Ohm external resistor – See the Resistor options linked below or use the ‘Which Resistor’ button on this page
- 2 x Analogue Inputs, 3 Digital Inputs,4 Programmable Digital I/O, 2 Analogue outputs, 2 Digital outputs (relay contacts).
- Input Current –5.3A at high overload or 7.6A when Fan/Pump rating set.
- Input Voltage – 380/480V three phase +-10% at 50/60Hz.
- Input fuse – 10A when Fan/Pump rating set
