ABB MS11625 Starter Motor

ABB MS11625 Starter Motor

ABB MS11625 Starter Motor

• Extended Product Type: MS116-25
• Product Description: MS116-25 Manual Motor Starter

• Product Net Width: 45 mm

• Product Net Height: 97.8 mm

• Product Net Depth / Length: 85.4 mm

• Long Description: This device is used to manually switch on and off motors and to protect them reliably and without the need for a fuse from short-circuits, overload and phase failures. It offers a rated service short-circuit breaking capacity Ics = 10 kA at 400 VAC and trip class 10A. It is suitable for three- and single-phase applications. Auxiliary contacts, signaling contacts, undervoltage releases, shunt trips, 3-phase bus bars, power in-feed blocks and locking devices for protection against unauthorized changes are available as accessory.

MS116-25 Product Specification:

• • Rated Service Short-Circuit Breaking Capacity (I_cs):
  • (230 V AC) 10 kA
    (400 V AC) 10 kA
    (440 V AC) 3 kA
    (500 V AC) 3 kA
    (690 V AC) 2 kA

• Rated Ultimate Short-Circuit Breaking Capacity (I_cu):

  (230 V AC) 16 kA
  (400 V AC) 16 kA
  (440 V AC) 15 kA
  (500 V AC) 10 kA
  (690 V AC) 3 kA

• Rated Instantaneous Short-Circuit Current Setting (I_i):

  375 A

• Setting Range:

  20 … 25 A

• Rated Operational Power AC-3 (P_e):

  (400 V) Three Phase 11 kW

• Rated Operational Power AC-3e (P_e):

  (400 V) Three Phase 11 kW

• Rated Operational Voltage:

  Main Circuit 690 V AC

• Rated Operational Current (I_e):

  25 A

• Rated Operational Current AC-3 (I_e):

  25 A

• Rated Operational Current AC-3e (I_e):

  25 A

• Rated Frequency (f):

  Main Circuit 50 Hz
  Main Circuit 60 Hz

• Rated Impulse Withstand Voltage (U_imp):

  Main Circuit 6 kV

• Rated Insulation Voltage (U_i):

  690 V

• Power Loss:

  at Rated Operating Conditions per Pole 1.8 … 2.8 W

• Number of Poles:

  3

• Conventional Free-air Thermal Current (I_th):

  Main Circuit 25 A

• Degree of Protection:

  Housing IP20
  Main Circuit Terminals IP10

• Pollution Degree:

  3

• Electrical Durability:

  50000 cycle

• Mechanical Durability:

  100000 cycle

• Terminal Type:

  Screw Terminals

• Connecting Capacity Main Circuit:

  Flexible with Ferrule 1/2x 0.75 … 6 mm²
  Flexible with Insulated Ferrule 1/2x 0.75 … 6 mm²
  Flexible 1/2x 1 … 2.5 mm²
  Flexible 1/2x 2.5 … 6 mm²
  Rigid 1/2x 1 … 2.5 mm²
  Rigid 1/2x 2.5 … 6 mm²

• Tightening Torque:

  Main Circuit 2 N·m

• Wire Stripping Length:

  Main Circuit 10 mm

• Recommended Screw Driver:

  Pozidriv 2

• Mounting Position:

  1 … 6

• Mounting on DIN Rail:

  TH35-15 (35 x 15 mm Mounting Rail) acc. to IEC 60715
  TH35-7.5 (35 x 7.5 mm Mounting Rail) acc. to IEC 60715

• Minimum Mounting Distance:

  Electrical Conductive Board, Horizontal – Up to 400 V 0 mm
  Electrical Conductive Board, Horizontal – Up to 690 V 1.5 mm
  Electrical Conductive Board, Vertical 75 mm
  Other Device Same Type, Horizontal 0 mm
  Other Device Same Type, Vertical 150 mm

• Contact Position Indication:

  ON / OFF

  Actuator Type:

  Rotary Handle