Sure-Flex 10S178 Flange
Sure-Flex 10S178 Flange
- It is a mechanical joint that connects two pipes, equipment, or sections of a structure, usually by bolting them together.
- They serve several purposes, including providing easy access for maintenance, allowing for expansion and contraction of pipes, and ensuring a leak-proof connection. They have a flat or raised face where the two mating flanges are brought into contact. The face helps to create a seal and distribute the bolt load evenly. They are designed to withstand specific pressure levels.
Product Specification:
Product Family: Sure-Flex Type S BTS Flange
Material: High Strength Cast Iron
Size: 10
Bore Diameter: 1 7/8 in
Rated Torque: 3,735 lb-in with EPDM or Neoprene sleeve; 11,350 lb-in with Hytrel sleeve
Max RPM: 3,600 RPM
Setscrew Length: 1 in
Bore Type: Finished with Keyway
Bore Tolerance: +.0005 to +.0015 in
Keyseat: 1/2 in x 1/4 in
Setscrew Size: 1/2-13 UNC
Setscrew Torque Requirement: 23 lb-in
Setscrew Location: One over KS and @ 90 Degrees
Max Angular Gap Misalignment: 0.128 in with EPDM/Neoprene Sleeves and 0.032 in with Hytrel Sleeves
Max Angular Misalignment: 1° with EPDM/Neoprene Sleeves and 1/4° with Hytrel Sleeves
Max Parallel Misalignment: 0.025 in with EPDM/Neoprene Sleeves and 0.020 in with Hytrel Sleeves
Component WR²: 0.4853 lb-ft²
Hub: Shaft Hub
(C) Length Through Bore: 2 23/32 in
(D) Outside Diameter: 1 1/2 in
(E) SF Hub Length: 13/16 in
(H) SF Hub Diameter: 4 3/8 in
(S) Set Screw Distance: 7/16 in
(T) SF Flange Length: 1 7/32 in
